[Atmswap] ATM stuff for sale

[Andy Saulietis]

Hello,

I've been posting on the ATM, CCD, & other related
sites for several years. FYI here's some info on ATM
related stuff I can provide or have on hand for sale:

- HDPE plastic worm gears, 180 to 720 teeth, 1/2" thick. These use
  1/2-10 Acme thread stock for worms & come with the worm
  and 6" of 1/4" dia drill rod shaft. PE is ~30 arc sec on
  these. Price is # teeeth/4. I have some 180 & 240t gears in stock.

- New design dual filter wheels, currently in beta testing. These
  are for 25mm filters up to 2.4mm thick & have 8 holes on one
  wheel & 3 on the other, for all permutations of RGB, CMY, clear &
  open on the 1st wheel, IR reject, clear, open, & opaque on the other.
  Thickness is .6", OD is 5.25". Female T-thread & male stub both
  sides. Special threads/mounts available. These cost $250 each
  + shipping. Single 8 hole wheels also available, $175 ea. Turret
  with 1.25" eyepiece mount & t-thread on other end, $75; these
  become an integral part of the FW & use up .125" additional
  focal distance, price is $75 if bought with FW, $100 to add later.
  A motorized version is in development.

- 1 only, 8" dia x 1.25" Pyrex mirror blank, polished to ~50' focal
  length for unfinished heliostat, $75 + shipping.

- 1 only, 16" dia x 3" thick Pyrex mirror 'blank', has ~22' radius
  polished/damaged coating one side, Blanchard ground flat other side.
  $800 or swap for good used laptop with ECP parallel port and
  minimum 800 x 600 active matrix display.

  
Andy Saulietis
ISS Enterprises
39 Silver Fox Trail
Mayhill NM 88339
505-687-3067 voice
505-687-3021 fax, call voice or e-mail to set up
e-mail: iss@pvtnetworks.net